Tuesday, December 14, 2010

White Ash

Here are the partly milled pieces of 8/4 white ash. The edge has yet to be completely squared to the faces. I postponed aligning the cutterhead to the outfeed table on the jointer while I worked on getting the dust collector set up. The dust collector has its own 240V/20A circuit, so I don't expect it will be tripping out. The guy I bought it from was tripping out a 120V/20A circuit despite it only being a 2HP unit, so it definitely has a hefty inrush current draw when it first starts up.

By the way, I am really beginning to despise the amount of money spent on electrical odds/ends and wire.

No comments:

Post a Comment